Stone & Tile Restoration in Acton and West London
Stone and tile floors, steps, worktops and walls lose their finish long before they wear out. Dull patches, dark grout, old sealer, rust and ground-in dirt are all fixable, but only if the surface is identified first and the right method is used.
Why stone and tile need a different approach
The wrong product is the usual cause of permanent damage. An acid cleaner on marble or limestone etches the surface for good, and aggressive scrubbing on a polished finish leaves scratches. That is why every job starts with identifying the material, not with a bucket of cleaner.
John is trained in professional stone restoration, from deep cleaning through to diamond polishing and sealing. The method is matched to the stone, and you are told honestly what can and cannot be achieved before any work starts.
What's included — and what isn't
Included
- Surface identification: scratch and acid tests, so the right chemistry and method are used
- A survey of scratches, etching, staining, lippage and the overall condition of the surface
- Options and price points, for example clean only, clean and seal, or a full restoration
- Deep cleaning with the correct alkaline or acid cleaner, grout scrubbed by hand, then machine scrubbed and extracted
- Edges, corners and detail work finished by hand
- Etch mark and scratch removal by diamond polishing or grinding, where the surface allows it
- Honing and polishing to the finish you agree, from matt to high sheen
- Sealing to suit the stone: impregnating, colour-enhancing or topical finish
- Stripping of failed or old sealer and coatings
- Targeted treatment of rust, oil and organic stains
- Resin filling of cracks and holes, ground flat and refinished
- Before-and-after photos and aftercare advice
Not included
- Replacing cracked, broken or missing tiles and stone
- Re-grouting or re-laying, unless quoted separately
- Polishing quarry, Victorian or other unpolishable tile, which can be cleaned and sealed but not polished
- A mirror finish on every stone: pad finishing leaves a good sheen, and some surfaces will show an orange-peel texture
- Guaranteeing that deep or old stains and etches will disappear completely
Materials and surfaces covered
Each surface is tested first, because they behave differently. Marble, limestone, travertine and terrazzo are acid-sensitive and are never cleaned with acid. Slate, terracotta, flagstone and granite are not acid-sensitive. Quarry and Victorian tiles are cleaned and sealed but cannot be polished. If you are not sure what you have, send a photo.
Common stains we remove
Moss and algae are only part of it. John also treats the stains below, choosing the product to suit both the stain and the surface.
Oil, grease & organic
- Fuel / oil
- Grease, fat & cooking oil
- Organic stains
- Tannin
- Biofilm
- Lawn fertiliser
- Blood
- Egg
- Urine
Metal & mineral
- Rust
- Copper oxide
- Lead carbonate
- Lead oxide
- Limescale
- Efflorescence
- Acid damage
Paint, tar & building residue
- Paint splashes
- Tar & glue
- Bitumen
- Concrete, grout & mortar
Fire, carbon & traffic
- Fire damage
- Carbon
- Traffic film
Sealer problems
- Failed sealer
- Trapped moisture & sealer repairs
Some stains, especially oil, rust and anything that has soaked deep into porous stone, can be faded rather than removed completely. Send a photo of the stain and John will tell you honestly what can be achieved before you book.
Surface by surface
| Surface | What it needs | Watch for |
|---|---|---|
| Terrazzo | Gentle deep clean, then honing or polishing and sealing | Acid- and scratch-sensitive, so pH-neutral or alkaline products only |
| Slate | Deep clean, then sealing with an enhancer or topical seal | Not acid-sensitive, but it scratches easily |
| Terracotta | Deep clean, then sealing to stop it absorbing stains | Natural clay is porous and marks easily |
| Quarry tiles | Acid cleaner or alkaline deep clean, grout scrubbed, then sealed if suitable | Hard-wearing but cannot be polished |
| Travertine | Gentle clean, filling of natural holes with resin, then honing and sealing | Acid-sensitive, with open pores and holes |
What each service does
- Deep clean: removes ground-in dirt, grease and grout staining without harming the stone
- Survey and identification: stops the wrong product being used on the wrong surface
- Etch and scratch removal: etches are chemical damage, so cleaning cannot remove them and they need diamond polishing
- Honing and polishing: restores the finish, from matt to a higher sheen, depending on the stone
- Sealing: slows staining and makes everyday cleaning easier
- Stripping: removes failed or patchy sealer before the surface is re-sealed
- Stain removal: rust, oil, food and colour stains treated with the product that suits the stain and stone
- Resin filling: repairs cracks and holes, tinted to blend in where needed
How the job runs
- 1Send photos and your postcodePhotos of the whole area and close-ups of the worst damage, plus what the surface is, if you know. John works out the likely surface and condition.
- 2Fixed price and optionsYou get a fixed price, with options where they exist, such as clean only, clean and seal, or restore and polish, so you choose the level of work.
- 3Test, clean and restoreThe surface is tested first, then cleaned, and polished, stripped or repaired as agreed. Nearby surfaces are protected throughout.
- 4Seal and aftercareSealing and finishing go on last. You get before-and-after photos and a simple guide to keeping the surface in good condition.
Safety and care
- A test is done on every new surface before any product or abrasive is used
- Acid-sensitive stone is never cleaned with acid products
- Metals, fittings and nearby surfaces are protected, and the area is masked off
- Cleaners are rinsed off fully, because residue can dull or damage the finish
Polishing, grinding and stripping involve water, slurry and strong products, so the area is kept clear of children and pets while the work is done and while sealers cure.
How pricing works
From £95
Stone and tile restoration is quoted as a fixed job from your photos. The price starts from the minimum charge and depends on the surface, the level of damage, the treatment needed and the finish you want, rather than a single price per square metre.
- The type of stone or tile, and how delicate it is
- The area, measured from your photos
- The level of damage: scratches, etching, staining or lippage
- The treatment needed: clean only, polishing, stripping, resin repair or sealing
- The finish you want, from matt to high sheen
Prices start from the minimum charge and are subject to surface, damage, treatment and finish. You will always be told the price, and what it includes, before work starts.
Our minimum charge is £95.00.
Where we are able to, we use the new Google Earth measurement tool, which is proven to be very accurate for square meter readings.
Stone and tile restoration questions
How much does stone and tile restoration cost?
Prices start from £95, subject to the surface, the level of damage, the treatment needed and the finish you want. John confirms a fixed price from your photos.
Can etch marks and scratches be removed?
Often, yes. Etches are chemical damage rather than dirt, so cleaning cannot remove them. They need diamond polishing, which restores the surface mechanically. Deep or heavy damage may need grinding, and John will tell you what is realistic from your photos.
Can you polish quarry or Victorian tiles?
No. Quarry and Victorian tiles cannot be polished, but they can be deep cleaned and, where suitable, sealed to protect them and bring the colour back.
How do you know what type of stone I have?
John tests it. A scratch test and an acid test tell marble, limestone and travertine apart from granite, porcelain and ceramic. Photos help, but a customer's description is never relied on without testing.
Should I seal my stone or tile?
Usually, yes. Sealing slows staining and makes cleaning easier. The right type depends on the stone: some are impregnated, some are colour-enhanced and some are given a topical finish. A test area is shown first where it matters.
Can you remove old sealer?
Yes. Failed, patchy or flaking sealer is stripped with a stripper suited to the coating, then the surface is cleaned and re-sealed.
Can cracks and holes in travertine or stone be filled?
Yes. They are filled with a tinted resin, ground flat and then refinished, so the repair blends in.
Will the finish look perfect?
John manages expectations from the start. Pad finishing gives a good sheen but not a mirror, and old or deep damage may improve rather than disappear completely.
Send photos for a fixed quote
Send photos of the whole area and a close-up of the worst damage, plus your postcode, and you will get a fixed price within 24 hours.