Skip to content

Car Park and Forecourt Cleaning in Perivale, West London

A car park takes everything cars bring with them — oil from sumps and gearboxes, diesel around the pump area on a forecourt, rubber dust in every bay, and the black residue that builds along kerb lines — and it collects it in the places that show worst: the entrance, the first four bays, and every turning circle. URBNX cleans car parks, forecourts and service yards across Perivale and the surrounding industrial estates, usually out of hours and always with the drainage plan agreed first.

Acton W3 basedFixed price from your photos5.0 on Google (20 reviews)

What a car park collects in a year

Perivale is mostly tarmac and concrete hardstanding, and both behave differently. Tarmac holds oil well and cannot take a concentrated jet without scuffing, so oil is lifted with a degreaser and a low-pressure pass rather than blasted. Concrete is more forgiving and responds well to a firmer wash, which is why older yards and loading areas come up so much better than expected. Shaded bays under trees go green quickly, and moss in the expansion joints is the first thing to look at, because it holds water against the surface.

Two things decide how good the finish is: how well the gum and oil are treated, and whether the surface is left to dry before anyone drives back on it. Bays are worked in sections so half the car park stays usable, or the whole area is done overnight. If you plan to have lines re-marked by another contractor, clean first and mark afterwards, because washing a freshly marked car park softens new paint.

What's included — and what isn't

Included

  • A site check or photo survey, with bay numbers, surfaces, drainage and access confirmed
  • Pressure washing of bays, aisles, ramps, entrance aprons, kerb lines and turning areas
  • Degreasing and treatment of oil, fuel and hydraulic spots, with badly affected bays treated individually
  • Gum removal on walkways and entrance aprons where the surface allows it
  • Moss, algae and weed growth lifted out of joints, kerbs and shaded bays
  • Litter and loose debris cleared before washing, so nothing is pushed into the drains
  • Contained and correctly disposed wash water where there is no interceptor on site
  • Out-of-hours scheduling, cones and signage, and the area left safe for traffic
  • Before-and-after photos for the landlord, the managing agent or your own records

Not included

  • Resurfacing, pothole repair, kerb replacement or drainage works
  • Removing oil that has soaked into old tarmac — it fades, but the patch remains
  • Line marking, which we do not offer
  • Multi-storey decks above ground level where wash water cannot be contained or drained safely
  • Waste removal beyond litter cleared as part of the wash

Materials and surfaces covered

Tarmac car parksConcrete bays and yardsBlock paving car parksResin-bound surfacingForecourts (not live fuel stations)Ramps and entrance apronsService yards and loading baysKerb lines and expansion joints

Tarmac is washed at low pressure with a degreaser doing the work, because a concentrated jet lifts the binder and leaves a permanent scar. Concrete takes a firm, even pass and cleans up the most dramatically of the group. Block paving car parks are cleaned and can be re-sanded where the joints have opened. Resin-bound areas are washed at very low pressure so the aggregate is not loosened, and expansion joints are cleaned out rather than blasted.

How the job runs

  1. 1
    Send photos and bay numbersPhotos of each area, the entrance, and any badly stained bays, plus your postcode and the hours the car park can be closed.
  2. 2
    Fixed price and a planYou get a fixed price and a written plan for the sections, so you know which bays are out of use and when.
  3. 3
    Clear, degrease, washLitter and debris come up first, oil spots are treated, then the surface is washed in sections and the drains checked as it goes.
  4. 4
    Dry, then hand backThe area is left to dry before traffic returns, with cones removed and before-and-after photos sent the same day.

Safety and care

  • Cones, barriers and signage for every section, with a pedestrian route kept clear of the wash area
  • A method statement and risk assessment issued for managing agents, landlords and facilities teams
  • Wash water contained and pumped out where there is no interceptor, never sent to surface water drains
  • No work in live traffic aisles without segregation, and no work on decks where run-off cannot be controlled

Car park work is planned around vehicles, not around the cleaning. If the site cannot be closed or sectioned safely, the job is split across visits rather than done with cars moving through it.

How pricing works

From £95

Small private car park or forecourtFrom £95
Commercial car park with stained baysFrom £95
Regular cleaning contractFrom £95

Car park cleaning is priced per job on the number of bays and the area of hardstanding, rather than on a per-bay rate published here. Staining, gum and the hours available change the time far more than the bay count does.

  • Total area and number of bays, measured rather than estimated from a distance
  • How many bays need individual oil or fuel treatment
  • Gum and staining on walkways and entrance aprons
  • Surface type — tarmac takes longer than concrete because of the lower-pressure passes
  • The window you can give, since a full overnight closure is faster than working in sections

Invoices can carry a purchase order reference.

Where we are able to, we use the new Google Earth measurement tool, which is proven to be very accurate for square meter readings.

Car park and forecourt cleaning questions

How long does a car park take to clean?

A 30-bay tarmac car park is usually a single evening. Larger sites, badly oil-stained bays or gum across a walkway add time, and the quote states the window needed rather than leaving it open.

Can you clean while the car park is in use?

Yes, in sections. Cones and barriers close one part at a time while the rest stays open. If the site can be closed entirely, the job is quicker and the finish more even.

Will pressure washing damage tarmac?

Not at the right pressure. Tarmac is washed at low pressure with a surface cleaner rather than a concentrated jet, because a held jet lifts the binder. That is why oil is treated before washing rather than blasted out.

Can you remove oil stains completely?

Fresh oil lifts well and older staining fades considerably, but oil that has soaked into old tarmac will often leave a shadow. A photo of the worst bay will get you a straight answer before booking.

Do you clean the drains as well?

Gully covers are cleared of debris created by the wash and checked as the work goes, but the below-ground drainage is not jetted or surveyed. That is a separate drainage contractor.

Do you need a water supply on site?

An outside tap helps on larger sites, but the van carries water, so it is not essential. No power is taken from the building.

Can you re-mark the lines after cleaning?

No, we do not offer line marking. We clean the surface and leave it dry so your line-marking contractor can mark a clean surface. Clean first and mark afterwards, because washing a freshly marked car park softens new paint.

Send photos for a fixed quote

Send photos of the car park, the entrance and any stained bays, plus the hours it can be closed, and you will get a fixed price and a working plan within 24 hours.