Skip to content
How Much Does Pressure Washing Cost in West London? (2026 Price Guide)
PRICES · GUIDE

How Much Does Pressure Washing Cost in West London? (2026 Price Guide)

By John Walsh, owner of URBNX Exterior Cleaning, Acton W3 · Published 14 November 2026

Pressure washing prices in West London in 2026 run from about £4 per m² for a straightforward water-only clean up to £8 per m² for block paving that needs re-sanding, with a £95 minimum charge on most jobs. A typical 20 m² patio, cleaned and treated for algae, comes to around £120. A 32 m² block-paved driveway, cleaned and re-sanded, comes to around £256. Render is priced separately, starting at £95 for a typical two-storey terraced front.

Those are our own prices, not an industry average, and this page sets out exactly what sits behind them — so you can check a quote you already have, or work out roughly what your own job should cost before you ask.

How much does pressure washing cost, surface by surface?

Below are the actual rates we charge across Acton, Ealing, Chiswick, Hanwell and the rest of West London in 2026. Every price is per square metre of surface. Where we are able to, we use the new Google Earth measurement tool, which is proven to be very accurate for square meter readings, so you do not have to measure anything yourself.

SurfaceWhat the price covers2026 price
Patio slabs and pavingWash £4/m² · Wash & treat £6/m² · Wash, treat & protect £7/m²From £4/m²
Driveway (block paving, concrete, resin)Wash £4/m² · Wash & treat £6/m² · Wash, treat & protect £7/m²From £4/m²
Block paving with clean and re-sandDeep clean, joints cleared, kiln-dried sand brushed back in£8/m²
Victorian tile pathFixed price for a standard front path, carefully cleaned tiles only£95
Render and walls (soft wash)Low-pressure biocide treatment and rinse, no blasting£7/m² · typical two-storey front from £95
Sealing (after cleaning)Impregnating sealer applied to dry pavingQuoted by area and product

There is a £95 minimum charge on pressure washing work. That is not a penalty for small jobs, it is the cost of getting a van, machine, water supply and two hours on site — a 6 m² front path still takes a full setup at both ends. Anything above roughly 25 m² sits comfortably over the minimum, which is why a full patio or driveway is usually better value per square metre than a small square of paving.

Full detail on each service sits on its own page: patio cleaning (from £4/m²), driveway cleaning (from £4/m²), Victorian tile paths (£95 fixed), render soft washing (from £95) and block paving sealing.

What do the different price tiers actually mean?

A wash on its own is water and a rotary surface cleaner. It lifts dirt, moss and the top layer of algae, and it is the right choice on a surface that is cleaned regularly and has no established organic growth.

Wash and treat adds a biocide treatment after the clean. This is what most West London patios and driveways need, because the green and black staining is alive: it is algae and lichen sitting in the pores of the paving. A wash removes what is on the surface, the treatment kills the roots so it does not reappear within a month or two. If your paving has been cleaned before and went green again within a season, this is the tier that fixes it.

Wash, treat and protect goes one step further with a protective application that slows the return of growth and makes future cleaning quicker. It suits north-facing patios, paving under trees, and anything you would rather not think about again for two or three years. On block paving, the equivalent longer-term option is sealing after the clean and re-sand.

What drives pressure washing costs up or down?

Five things move the price on a West London job, and only one of them is the size of the surface.

  • Surface size and shape. A simple rectangle costs less per m² than the same area broken into strips, corners and tight edges, because the machine has to be repositioned constantly.
  • How established the growth is. A light green film on a patio is a single pass. Thick moss with black lichen behind it needs two applications, a longer dwell and a second visit in some cases.
  • The surface itself. Smooth concrete is quick. Old, porous York stone or weathered sandstone takes more care and more time, and Indian sandstone in particular can be marked by water pressure if it is not worked properly. Block paving adds the re-sand step if the joints have washed out.
  • Access and water. Rear patios reached through the house, basements, tight side returns and no outside tap all add time. In dense parts of Hammersmith and Shepherd's Bush, parking and the walk from the van is a real cost that gets built into the quote.
  • What has to be removed afterwards. Green waste, silt and old joint sand all have to leave site. A large moss-heavy driveway produces several bags of it.

Is a per-m² price or a fixed quote better?

For you, a fixed quote is always better — and that is how we price. The per-m² rates above exist so you can see the logic and sanity-check a number, but the price you are given is a single figure for the job, agreed before anything starts.

Per-m² pricing only works fairly when the surface is simple, the growth is average and the access is straightforward. As soon as a job has a narrow side return, a wall of moss along a shaded boundary or a flight of steps, a strict rate per square metre either overcharges you or underprices the work. A fixed price, arrived at from photographs, removes that argument on the day. The only thing that changes it is the surface turning out to be materially different from the photos, and that gets discussed with you before any extra work happens, not billed afterwards.

How do you compare pressure washing quotes fairly?

Compare what is included, not just the total. Two quotes for a 30 m² driveway at £120 and £210 can easily represent the same value per hour of real work, and the cheaper one can end up costing more if the growth comes straight back.

  • Does the quote include a treatment, or is it a water-only wash? A wash-only price on mossy block paving will need redoing.
  • Is re-sanding included on block paving? If it is not, expect to pay again for sand and labour.
  • Is waste removal included, or is there a skip charge on top?
  • Is the company insured, and can they show before/after photos from streets near you rather than stock images?
  • Is the number in the quote the number you pay, or an estimate with a day rate behind it?
  • Are they using a rotary surface cleaner on paving, or a fan jet? A fan jet on paving strips the joints and leaves stripes.

What does a typical West London job actually cost?

Three real shapes of job, priced from our 2026 rates:

  • A 20 m² terrace patio in Ealing with green algae across the slabs: wash and treat, £120. About two to three hours on site.
  • A 32 m² block-paved driveway in Greenford with moss in the joints and washed-out sand: clean and re-sand, £256. Most of a morning.
  • A Victorian tiled front path in Chiswick with 100 years of grime in the pattern: £95 fixed, plus a render front on the same visit from £95. The two together is where combining jobs saves money.
Driveway Acton before cleaning by URBNXDriveway Acton after cleaning by URBNX
Driveway — Acton. Before and after by URBNX.
Pathway Acton before cleaning by URBNXPathway Acton after cleaning by URBNX
Pathway — Acton. Before and after by URBNX.

Real jobs from our gallery — every price above is agreed from photos like these before the work is booked.

Why is the cheapest quote rarely the cheapest job?

Because paving and render punish shortcuts in ways that show up weeks later. Too much pressure on a patio lifts the face of the slabs and leaves a permanent rough patch that holds dirt. Too much pressure on render forces water behind the coating. Skipping the treatment means the algae in the pores survives the wash, and the surface is green again by the following spring — so the cheap clean gets paid for twice.

The other pattern we see is the quote that grows on the day: a low number to win the job, then "the moss was worse than we thought", then waste removal on top. Our fixed prices exist precisely to avoid that, and the reason we ask for photos first is that the photos remove the guesswork from both sides.

How do you get an exact price for your own paving?

Send two or three photos of the surface and your postcode. You get a fixed price back, usually the same day and always within 24 hours, with the treatment tier that actually suits the surface rather than the most expensive one. There is no call-out charge within our West London patch, and no obligation to book.

Send a photo for a fixed price or get in touch if you would rather talk it through. If you have a quote from someone else in front of you, send that too and John will tell you honestly whether it is good value for the work described.

Free quotes · Same-day response · No obligation

Don't forget your annual clean

Get a friendly seasonal reminder when it's time for your next exterior clean, plus occasional exclusive local offers. No spam, ever.

By submitting this form, you are consenting to receive marketing emails from: Urbnx Pressure Washing, 33 Edendale, Creswick Road, London, London, W3 9HB, GB, www.urbnxservices.co.uk. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact.